Topic has a solution and is locked
Topic locked

E57 / LEICA / AREATARGET GENRATOR

Unity Editor
June 21, 2022 - 3:41am #1
Topic solved

Hello to all,

After having read a lot of your advice and problem solving it's up to me to ask you for help.

Since version 10.7.2 I can't generate AREATARGET from ATG with an E57 from LEICA RTC360 and REGISTER 360. I have followed the whole process but it does not change anything.

Do you have a solution ? 

 

[ SUCCESS ] E57 shall contain one or more Data3D structures.

[ SUCCESS ] 'cartesianBounds' field in Data3D structure shall be defined.

[ SUCCESS ] 'colorLimits' field in Data3D structure shall be defined.

[ SUCCESS ] 'cartesianX', 'cartesianY', 'cartesianZ' fields in PointRecord structure shall be defined.

[ SUCCESS ] 'colorRed', 'colorGreen', 'colorBlue' fields in PointRecord structure shall be defined.

[   FAIL  ] 'nor:normalX', 'nor:normalY', 'nor:normalZ' fields in PointRecord structure shall be defined or we need to be able to estimate the normals. To estimate normals each Data3D structure shall have associated images from exactly one scanning position through Image2D associatedData3DGuid field.

[ SUCCESS ] 'isColorInvalid' field in PointRecord structure must not be defined.

[ SUCCESS ] E57 shall contain one or more Image2D structures that have either 'sphericalRepresentation' field or 'pinholeRepresentation' field.

[ SUCCESS ] 'pose' field in Image2D structure shall be defined.

[ SUCCESS ] Spherical images shall have minimal resolution of 4096x2048 and their width = 2 * height. Pinhole images shall have minimal resolution of 1024x1024 and must be square (width = height).

AttachmentSize
Image icon ATG04.png74.77 KB
Image icon ATG03.png61.1 KB
Image icon ATG02.png77.62 KB
Image icon ATG01.png51.82 KB
Platform: 

E57 / LEICA / AREATARGET GENRATOR

September 7, 2022 - 5:41am #4

The answer to my own question is yes. As long as you have Faro Raw files including panoramic pictures you can post process the point cloud in Leica Cyclone Register 360 and create a area target from there.

 

E57 / LEICA / AREATARGET GENRATOR

August 22, 2022 - 3:56am #3

Hi all

 

I edited my old question.

 

I have a scan that was done with a Faro laser scanner so the Area Target Generator app fails to create an area target.

 

I did some research and discovered that Leica Cyclone 360 is able to import raw Faro data formats. 

My question is: Can I import the Faro raw data files into Leica Cyclone 360 and post process the point cloud there so that I then can import it into the Area Target Generator App?

Has anyone done this or tried?

 

Cheers

 

 

E57 / LEICA / AREATARGET GENRATOR

June 21, 2022 - 6:14am #2

Hey there,

 

Were you able to generate Area Targets with older versions of the Area Target Generator? Also did you go through our Leica workflow? You can find it here: https://library.vuforia.com/area-targets/leica-scans#transferring-and-post-processing-the-scan

 

Kind regards,

Patrick Scheper

Technical Community Manager

Topic locked