Error in Area Target Generator

Hi, 

We have a set of E57 scan data that I am trying to create an area target from using the windows tool but we are getting the following error.

Area Target Generator Headless Copyright 2021 PTC Inc. All rights reserved. Starting E57 processing "BEL-THER-PCS-GN-001_Structured.e57" -------------------------------------------------- E57 processing: Validation of the E57 file failed. Check the validation report for details. [ SUCCESS ] E57 shall contain one or more Data3D structures. [   FAIL  ] 'cartesianBounds' field in Data3D structure shall be defined. [ SUCCESS ] 'colorLimits' field in Data3D structure shall be defined. [   FAIL  ] 'cartesianX', 'cartesianY', 'cartesianZ' fields in PointRecord structure shall be defined. [ SUCCESS ] 'colorRed', 'colorGreen', 'colorBlue' fields in PointRecord structure shall be defined. [   FAIL  ] 'nor:normalX', 'nor:normalY', 'nor:normalZ' fields in PointRecord structure shall be defined or we need to be able to estimate the normals. To estimate normals each Data3D structure shall have associated images from exactly one scanning position through Image2D associatedData3DGuid field. [ SUCCESS ] 'isColorInvalid' field in PointRecord structure must not be defined. [   FAIL  ] E57 shall contain one or more Image2D structures that have either 'sphericalRepresentation' field or 'pinholeRepresentation' field. [ SUCCESS ] 'pose' field in Image2D structure shall be defined. [ SUCCESS ] Spherical images shall have minimal resolution of 4096x2048 and their width = 2 * height. Pinhole images shall have minimal resolution of 1024x1024 and must be square (width = height).

I am not sure on what scanner the E57 file is from. Does the Target generator only support the mentioned scanners on the developer page? My understanding was that the E57 file is a generic file and therfore it shouldn't matter?

Any help appreciated thanks