Hello,
I'm trying to place a family of holograms after recognizing an imagetarget to augment the room where that marker is placed but I am having some problems. The idea is that after I place the holograms relative to the imagetarget in Unity (as child objects, the final position of each hologram in Unity will be obtained through trial and error) it should show the holograms with the same relative distance and the same relatives angles in the room when the imagetarget is recognized.
One problem that I'm facing right now is that when I try to show only one hologram next to the marker with the same orientation as the marker, the hologram appears with a slight inclination forward or slightly spatially missplaced. The other problem that i can't get rid off is that if I move while gazing at the target, Vuforia keeps recognizing the image from the new viewing angle and therefore keeps changing the hologram's position and angle. I have tried stopping the tracker after recognizing the target, but as the first problem stated, this just leaves me with a missplaced hologram.
Some details:
- I am currently using extended tracking.
- The image has a 5 star rating, is 5cmx11cm, and I have tried recognizing it anywhere from 10cm to 60cm from it with the same results.
The spatial missplacing can be fixed by user calibration after it has been recognized, but the inclination fixing is rather difficult.
Any ideas what could be wrong?
Any help is greatly appreciated.
Hello sibutorovic,
Hello sibutorovic,
Can you share screenshots of the issue you are seeing? Are you able to reproduce it in playmode and/or the sample project?
Thanks,
Vuforia Support
Of course. The Hololens
Of course. The Hololens picture shows the hologram with a slight inclination forward. At the time of the photo capture the Vuforia tracker was deactivated as explained on the first post so the hologram didn't get moved by the recognition of the marker from different angles.
I'm not entirely clear which
I'm not entirely clear which object in the Unity screenshot is meant to be the target. When you test on the sample project are you also testing with the targets on a monitor screen instead of printed?
Thanks for replying and sorry
Thanks for replying and sorry for the late answer.