Log in or register to post comments

Can't upload svg marker

August 11, 2016 - 6:20am #1

Every time I try to upload an .svg file to a vumark database I get failed error, I cannot figure out why this is happening, the svg file I uploading is opening without issues in both Adobe illustrator and Method.ac online service.

 

Please advise

Can't upload svg marker

December 6, 2016 - 4:41am #18

The Vumark creation process is currently a mess. As I said in my previous post, it uploaded my large Vumark after verification passed, but it set the status to failed. I made another 5 character small Vumark and this one passed both the verification and the status turned to Active. But it seems that minor things in the Illustrator which matter very much are not in the tutorials. For example I didn't rearrange the layers in my Vumark design and after generating the Vumark PNG it came out full black no matter the character code. I then figured out that the problem was that the generator is listening to the layer stack from Illustrator and since my border is a filled black rectangle and it is higher on the stack than the dark and bright elements, it just painted black over everything. These things should be explained in the tutorial. I spent a very large amount of time figuring these out, especially because I never worked on anything in the Illustrator before.

 

Also I should be able to delete Active Vumarks from the database, not just Failed ones.

Can't upload svg marker

December 6, 2016 - 4:01am #17

I have the same problem. I attached my Illustrator Verification passed image. Can someone from Vuforia please take a look and help me with my Vumark design?

AttachmentSize
Image icon Capture.JPG185.93 KB

Can't upload svg marker

November 13, 2016 - 1:56am #16

Im having the exact same problem, on Illustrator it's all correct and I can export the SVG file perfectly, but when I try to upload it to the target manager, I get a Failed Status. How can I solve this problem?

Can't upload svg marker

September 2, 2016 - 12:05am #15

dm3d wrote:

tangoyzx wrote:

No "matrix(..." in svg file.

No appearance attributes for Elements/Contour/ClearSpace/Border.

Can you clarify the issue or error you are encountering?

 

upload the .svg and get Failed error, but my Image passed all requirements

what can I do to fix it?

Can't upload svg marker

August 31, 2016 - 10:47am #14

tangoyzx wrote:

No "matrix(..." in svg file.

No appearance attributes for Elements/Contour/ClearSpace/Border.

Can you clarify the issue or error you are encountering?

Can't upload svg marker

August 30, 2016 - 2:29am #13

same issue.

 

No "matrix(..." in svg file.

No appearance attributes for Elements/Contour/ClearSpace/Border.

 

What should I do next?

Issue

AttachmentSize
Image icon Issue.png51.04 KB

Can't upload svg marker

August 25, 2016 - 12:27am #12

Oh, I understand how it works now. I tried with the SVG files in the VuMark designer and it works.

Thank you Dave.

Can't upload svg marker

August 24, 2016 - 4:28pm #11

Hello,

The SVG files packaged with the 6.0 Vuforia samples are individual marker instances. These are not the same as the VuMark template file that is uploaded to the Target Manager and from which instance are generated.

Example SVG files that can be uploaded to the target manager are packaged with the VuMark Designer:

https://developer.vuforia.com/downloads/tool

Thanks, Dave

Can't upload svg marker

August 24, 2016 - 1:13am #10

Hello,

I'm having the same issue when trying to upload the SVG files provided in vuforia-samples-6-0-112 to my own database.

Since these Vumarks are the ones provided by Vuforia I would assume that the problem is not in their design, unless the validator bans the usage of these images on purpose. Is there any restriction in this regard? Otherwise there must be some other problem with the target manager.

Can't upload svg marker

August 23, 2016 - 11:54am #9

stationY wrote:

Just curious, are you able to remove the svg file you uploaded with the failed status from your Vumark Target library?

Yes, you can now remove failed VuMarks from your database in Target Manager. If you have multiple failed VuMarks along with successful VuMarks, you can select all and then click Delete and only the failed VuMarks will be removed.

Can't upload svg marker

August 12, 2016 - 4:11pm #8

Hello,

Thank you for the feedback. The VuMark design tools and processes will be continually improved following its introduction with Vuforia 6.

Thanks

Can't upload svg marker

August 12, 2016 - 12:24am #7

see Section 8.1 "Troubleshooting VuMark creation/detection fails"

 

Could you please share the link for the above section, can't seem to find it.

 

[edit]

never mind, found it.

The process of creating the VuMark is hard, tedious and requires some design skills.

I suggest an automated stand alone Application to simplify the creation proccess .

Can't upload svg marker

August 11, 2016 - 2:13pm #6

stationY wrote:

Having the same issues. Just curious, are you able to remove the svg file you uploaded with the failed status from your Vumark Target library? Usually you can remove the file by clicking the link on the file name, but there is no option for this.

Thanks.

Additional options for managing the VuMarks in the database are coming.

Can't upload svg marker

August 11, 2016 - 1:54pm #5

Having the same issues. Just curious, are you able to remove the svg file you uploaded with the failed status from your Vumark Target library? Usually you can remove the file by clicking the link on the file name, but there is no option for this.

Thanks.

Can't upload svg marker

August 11, 2016 - 1:49pm #4

The AI scripts currently validate a lot of the required criteria for VuMarks, but due to the large variety of ways to design options in Illustrator, sometimes you may get a passing status in AI while the SVG will fail compilation in the Target Manager. It is very important to read the VuMark Design Guide thoroughly and we've tried to capture some of the exception cases there as well. In particular see Section 8.1 "Troubleshooting VuMark creation/detection fails" for additional things to watch out for in your designs.

Can't upload svg marker

August 11, 2016 - 1:04pm #3

We have the same issue, when we run the script on the Illustrator document it says Pass to every requirements and Verify to the last one. Then, when we're trying to import it in the VuMark Target Manager, it's always failing.

 

Thanks.

Can't upload svg marker

August 11, 2016 - 9:02am #2

Hello,

Can you confirm that your design also passed all the VuMark Designer's verification checks? Please send a screen shot to confirm.

Thanks.

Log in or register to post comments